Monitor Audios engineers have developed a secret weapon for the i-deck called Automatic Position Correction. An integrated microphone measures irregularities caused by non-ideal room positions and uses a sophisticated Digital Signal Processor (DSP) to automatically adjust the i-deck to deliver the ideal sound - this is achieved automatically each time you turn on the system at the mains.
C-CAM® Bass Drivers
Refined over many years by Monitor Audio, Ceramic-Coated Aluminium/Magnesium is used as a driver cone material for all our speaker designs from the mid-market models up. Originally developed by the aerospace industry for jet engine components, C-CAMs properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. C-CAM bass drivers are able to resist the bending distortion imposed by sudden and extreme bass excursions to reproduce very clean, deep and dynamic bass frequencies. Conventional cone materials are more likely to flex in operation, producing a significant level of audible distortion.
- Ultra long-throw 12-inch driver featuring dished' C-CAM cone
- Triple suspension for ultimate linearity ensuring control at high power and excursions
- Oversized black anodised 3-inch voice coil which provides high power-handling and low distortion
- Powerful 500 W RMS Class-D amplifier with switching power supply provides instantaneous delivery of high current when required
- DSP processing with all control features and crossover performed digitally
- Automatic Position Correction plus automatic room setup feature using microphone for simple system optimisation
- USB for firmware updates
- Three preset EQ mode settings (Music, Movie, Impact)
|Lower Frequency Limit
||20 Hz (Typical IEC room)
|Upper Frequency Limit
||40 - 120 Hz variable
|Low Pass Filter Alignment
||Active 4th order 24 db/octave
||500 W continuous
||Class-D amplifier with switched-mode power supply (SMPSU)
|Bass EQ Profiles
||1: Movie 2: Music 3: Impact
||0 & 180 degrees
||Line Level >2 mV
|Input Level Requirements
||Standby after 20 minutes if no signal sensed
|Drive Unit Complement
||1 x 12" C-CAM subwoofer driver featuring triple suspension and 3" long throw voice coil
||5 - 12 V via 3.5 mm mono mini-jack socket
|Cabinet Dimensions (Excluding Grille and Terminals (H x W x D))
||340 x 340 x 380 mm (13 3/8 " x 13 3/8 " x 14 15/16 ")
|Dimensions (Including Grille, Amp & Feet)
||370 x 340 x 410 mm (14 9/16 " x 13 3/8 " x 16 1/8 ")
|Mains Input Voltage
||110 - 120 Vac / 220 - 240 Vac 50/60 Hz (Electronically Auto selected)
||400 W / 0.5 W in Standby (ErP approved)
Energy Star Rated:
Product Protection Plans are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase Product Protection Plans and one of the smartest ways to protect your investment.
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
should they break tomorrow, don't buy a Product Protection Plan. But if you're like most of us, protect yourself by purchasing inexpensive Product Protection Plans when you buy a new product and save yourself big money in the long run.