For open environments sound quality can be further enhanced through the use of a sealed ABR (Auxiliary Bass Radiator). The ABR works like a piston moving back and forth generated by the movement of the air via the motion of the mid/bass driver inside the sealed cabinet. This makes the ABR ultimately act like a conventional port resulting in superior low frequency punch and extra penetration whilst keeping the elements at bay.
C-CAM® Bass Drivers
Refined over many years by Monitor Audio, Ceramic-Coated Aluminium/Magnesium is used as a driver cone material for all our speaker designs from the mid-market models up. Originally developed by the aerospace industry for jet engine components, C-CAMs properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. C-CAM bass drivers are able to resist the bending distortion imposed by sudden and extreme bass excursions to reproduce very clean, deep and dynamic bass frequencies. Conventional cone materials are more likely to flex in operation, producing a significant level of audible distortion.
- 18 mm MDF cabinet construction with internal bracing
- Cool-running 200 W Class D amplifier with switch mode power supply (SMPSU)
- Twin side-firing 10" C-CAM drivers - one active and one passive ABR
- Low pass filter switch - for LFE or Stereo input selection
- Power switch with ON - Auto- Off/ trigger settings
- Stereo/ LFE RCA inputs
- 3 x Pre-set EQ settings - Music/Movie/Impact
||Active sub-woofer system - Auxiliary (ABR) loading. 18 mm MDF cabinet
|Lower Frequency Limit
||30 Hz (- 6 dB)
|Upper Frequency Limit
||Variable 40 - 120 Hz @ 24 dB/Octave
||200 Watts @ 1% THD+N
||Class D amplifier with Switch mode power supply (SMPSU)
|Bass EQ Profiles
||Music / Movie / Impact
||0 & 180 degrees
||Line Level >3.5mV
|Input Level Requirements
||Standby after approximately 15 minutes if no signal sensed
|Drive Unit Complement
||1 x 10" (254 mm) C-CAM long throw driver 1 x 10" (254 mm) Auxiliary bass radiator
||> 20 ohms
|Mains Input Voltage
||AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)
|Dimensions (Including Amp & Feet (H x W x D))
||348 x 330 x 345 mm (13 11/16 x 13 x 12 9/16 ")
||Stereo RCA in, LFE in, 12v Trigger in (3.5 mm mono mini-jack)
||5 - 12v via 3.5mm mono mini-jack socket
||200 Watts / 0.5 Watts in Standby (ErP approved)
||13.76 kg (30 lb 4 oz)
Energy Star Rated:
Product Protection Plans are usually very inexpensive and can save you thousands in the future.
It's simple and inexpensive to purchase Product Protection Plans and one of the smartest ways to protect your investment.
can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new
should they break tomorrow, don't buy a Product Protection Plan. But if you're like most of us, protect yourself by purchasing inexpensive Product Protection Plans when you buy a new product and save yourself big money in the long run.